Aftermarket steering wheels: fit is not the same as safe installation

Feature · November 20, 2026

An aftermarket steering wheel is only safe if the wheel, mounting hub and vehicle are compatible and the assembly is installed and maintained correctly. A failure at that connection can take away the driver’s control in an instant.

The NHVR describes a December 2025 crash in which an aftermarket steering wheel detached from the mounting hub of a prime mover towing a loaded semitrailer. The combination crossed to the wrong side of the road, left the carriageway, hit an embankment and rolled. The driver was injured.

The regulator identified loosening and failure of the mounting components. Its Safety Hub lesson is about the whole process: choosing a suitable part, confirming it fits the vehicle, installing it correctly, and checking it over time.

What should a fleet or workshop check?

  • Confirm compatibility. Check that the wheel and hub are intended for the vehicle and steering-column connection. A part that physically fits is not, by that fact alone, proven suitable.
  • Use the right installation process. Follow the component and vehicle manufacturer’s instructions and have the work completed by a competent person. Keep a record of the part, installation and any checks required by the manufacturer.
  • Check whether the work is a modification. The approval pathway depends on what has been changed and the vehicle. NHVR’s VSB6 includes a section for steering alterations, but this does not mean every replacement steering wheel automatically needs the same approval. If the change affects steering components or compliance, ask an Approved Vehicle Examiner or the relevant vehicle standards authority before work proceeds.
  • Include the cab in maintenance. The NHVR says inspections should include the steering wheel, column and mounting hardware. The National Heavy Vehicle Inspection Manual identifies loose or damaged steering components as grounds for rejection at inspection.
  • Act on movement or looseness. Drivers should report movement, looseness, cracking, wear or damage promptly. A vehicle with a known steering defect should not continue in service until it has been assessed and repaired.

Why the driver’s grip matters

A steering wheel can carry loads beyond turning the truck. Drivers may pull on it when getting into or out of the cab. The NHVR specifically says those loads should be considered when selecting and managing the assembly.

This is not a blanket ban on aftermarket steering wheels. The practical lesson is to treat the wheel and its mounting as safety-critical parts, and to verify suitability for the particular vehicle rather than relying on appearance or a generic fitment claim.

Sources: NHVR Safety Hub: Aftermarket Steering Wheel Detachment; National Heavy Vehicle Inspection Manual, Section 4; Vehicle Standards Bulletin 6; NHVR heavy vehicle modifications guidance. WWTG’s related report on the fatal dual-tyre rock strike covers a different hazard and control setting.